Residential Epoxy Flooring That Holds Up to Lowcountry Living

Seamless, waterproof, and easy to mop, built for basements, sunrooms, and mudrooms where Charleston humidity actually matters.

Get My Free Estimate Call (843) 849-6929

Or email us at info@epoxyflooringcharlestons.com

Bright basement with brick accent wall and durable epoxy tile flooring in Charleston home

A durable, easy-to-clean epoxy floor for basements, sunrooms, mudrooms, and living spaces, built to handle Charleston’s humidity without trapping moisture underneath.

A Floor That Handles Charleston Living

Whether it’s a basement that floods during storm season or a sunroom floor that needs to stand up to sandy feet and wet swimsuits, residential epoxy gives you a seamless, waterproof surface that’s easy to mop and won’t harbor mold. We diamond-grind and moisture-test every slab before coating, so the floor bonds properly and doesn’t trap the moisture that’s common in Lowcountry homes. Choose from solid colors, decorative flake, or quartz finishes to match your space.

Where We Install It

Basements and finished lower levels
Sunrooms and enclosed porches
Mudrooms and laundry rooms
Home gyms and hobby spaces
Living areas that need a durable, waterproof floor

Serving Charleston, Mount Pleasant, Summerville, and the Tri-County Area

Ready for a floor that actually holds up? Call (843) 849-6929 or request a free estimate and we’ll recommend the right finish for your space.

Who Residential Epoxy Is For

Residential epoxy solves different problems for different rooms. Here’s who calls us most:

Homeowners with a basement that’s flooded or smelled musty after storms
Families converting a sunroom or porch into real living space
Anyone tired of mopping grout lines or replacing water-damaged vinyl
Homeowners planning to age in place who need a durable, slip-resistant surface
Sellers who want move-in-ready floors that photograph well

Residential Epoxy Questions We Hear a Lot

Will epoxy work on a basement floor that’s flooded before?

Yes, that’s actually where moisture-testing matters most. We test the slab before quoting, and if there’s an ongoing moisture issue, we’ll tell you before you spend money on a coating that won’t hold. Most finished basements are a great fit once the slab checks out.

Can you coat over existing tile or vinyl?

No, existing tile, vinyl, or old coatings need to come out first so we can diamond-grind the bare concrete underneath. Epoxy bonds to prepared concrete, not to other flooring materials, skipping this step is exactly how DIY jobs fail.

My slab has cracks from settling. Is that a problem?

Not if it’s handled correctly. We repair settling cracks with a flexible filler as part of every job so they don’t reflect through the new floor. See our Concrete Crack Repair & Prep page for more on how we handle it.

Ready for a Floor That Actually Holds Up?

Call (843) 849-6929 or request a free estimate. We’ll walk your space, measure the room, and recommend the right finish, no pressure, no upsells.

Got Questions?

Can’t find what you’re looking for? Give us a call, we’re happy to walk through your project.

Call us (843) 849-6929

Talk to a Real Person

Yes, especially for basements, sunrooms, and converted living areas that see moisture or heavy foot traffic. A properly installed floor resists Charleston’s humidity and typically lasts 10-20 years, while looking far more finished than bare concrete.

Most residential jobs run $4-$9 per square foot depending on the finish, putting a typical room between kt-accordion-panel-inner”>

,200 and

,500. Pricing depends on your slab’s condition, the finish you choose, and whether crack repair or moisture mitigation is needed. We walk the space first rather than quoting sight-unseen.

It almost always comes down to prep. A cheap quote usually means a roller and a light acid etch with no real grinding or moisture testing. A proper quote includes diamond grinding, crack repair, and moisture testing — the steps that determine whether the floor lasts years or fails within months.

Yes, often more than other rooms. Basements sit closer to the water table and can trap moisture vapor more easily than an above-grade room, which is why moisture testing matters even more before coating a basement floor.

You can try a DIY kit, but most kits skip proper diamond-grinding and moisture testing, which is why so many DIY floors peel or bubble within a year. For a floor meant to last, professional prep makes the real difference.

Yes, we handle residential installations throughout the Charleston Tri-County area, from downtown homes to the surrounding suburbs.

Epoxy provides the base color and durability; polyaspartic is a faster-curing, UV-stable topcoat that resists yellowing better in rooms with natural light. We typically recommend polyaspartic topcoats for living spaces with windows.

You can typically walk on the floor within 24 hours and move furniture back in after 48 to 72 hours, depending on the specific system used. We’ll give you exact timing before we leave.

Charleston’s trusted epoxy flooring contractor. Locally owned, licensed and insured.

Call us (843) 849-6929

info@epoxyflooringcharlestons.com

2030 Wambaw Crk
Charleston, SC 29492

Navigate

Home
About
Services
Testimonials
FAQ
Contact

Areas We Serve

Serving the Charleston Tri-County

Charleston
Mount Pleasant
Summerville
James Island
North Charleston
Surrounding Areas

Claim My Free Estimate